HS-805L Decanters

IHI of Japan

2

Two reconditioned IHI HS-805L decanters in SS, bowls 31.5" X 104.5" and capable of 300-400 GPM on stillage. Built in Japan, supported and warranteed by KCS & C in USA. Mechanical support and reconditioning service performed in USA. Package includes new controls and drives supplied by Specialty Controls, Inc., Mr. Roger Harasty, Hammond, In. Shipment two (2) months. Start up service provided. Capacity on stillage 183% of P-5400 / SG-14 capacity. Pictures available. Click picture for more information. Available for discount price due to project cancellation.

24 X 38 SCREEN BOWL

Bird

2

Bird Machine 24 x 38 screen bowls in stainless steel. Details to follow.

PM-95000

Sharples Division of Alfa Laval

5

Sharples Division of Alfa Laval model PM-95000 decanters in 317/317 stainless steel with bowl dimensions of 40" x 140" or 1016 x 3556 mm, with 10 degree contour bowls, STC tiles, lined cake ports, 300,000 inch-pound gearboxes or Viscotherm backdrives with Rotodiff gear assemblies, lube systems, feed tubes, guards. Located Indiana for inspection.

T-1600

Sharples Division of Alfa Laval

1

Sharples Model T-1600 in 316 stainless with perforate basket. Details to follow.

4900

Bird

3

Decanter, 30" X 96" high "G" Bird decanters in stainless construction with 10 degree contour bowls, suitable for operation at 2550 X "G". Gearbox 75/1 ratioi, very attractive pricing. Model 4900.

TS-5000 Baskets

20

Newly redesigned solid bowl basket centrifuges specially designed for the separation of animal wastes, without the use of polyelectrolytes or any other additive. Click picture for more information. NSF / EPA TESTED AND VERIFIED FOR ANIMAL WASTE SEPARATIONS.

Basic Beliefs

Christianity

1

Basic and accurate beliefs of Christianity taken directly from the New Testament of the Bible. If you have questions about this subject, please send me an email.

4900

Bird

3

Bird model 4900 in 316L stainless built 1986 for ethanol plant and regularly maintained by Bird, 200 HP main drive, 460/3/60, with 40 HP Eddy Current Brake Backdrive, lube system.

HS-805

IHI of Japan

3

IHI of Japan model HS-805 decanters in stainless, skid mounted with Viscotherm hydraulic main drives and backdrives, bowls 31.5" x 104", carbide tiles, reported reconditioned and ready for reassembly and operation, with controls, good for 2600 RPM generating up to 3000 x G.

B-214

Alfa Laval of Sweden

11

Alfa Laval B-214 separators suitable for the separation of seawater from oil, and for other liquid / liquid separations. Feed rate up to 300 GPM or 68 M3 per hour. With 40-50 HP (30-37.5 KW) motors, 460/3/60 current.

CC-458-00-32

Westfalia of Germany

2

Brand new never operated Westfalia CC-458-00-32 decanters built in 2007, stainless steel with bowl dimensions of 18" x 80" and capable of 3400 RPM max generating up to 2850 x G, with STC tiles on conveyor, 40 HP 460/3/60 VFD main drive, 20 HP backdrive, all VFD controls.

DS-706

Sharples Division of Alfa Laval

6

Sharples Division of Alfa Laval DS-706 (PM-76000 or SG-16) decanters in stainless with p-95/180 gearboxes, 10" single lead conveyor flights with STC tiles, 360 degree cake ports with STC liners, moon plate dams, vintage 1996, excellent. See pictures. Motor and control information available.

Jumbo 3

Pieralisi of Italy

13

Truck mounted Jumbo-3 decanters in 304 stainless, 6.1 inch (155 mm) pitch with STC tiles in feed zone and conical section, welded carbide in liquid end, Rotodiff type gearbox rated at 78,800 inch pounds or 8,920 Nm, with two viscotherm pumps fed by a 55 KW XP motor, 480/3/60 or 400/3/50 current.

GSC-45-06-177

Westfalia of Germany

1

last operating in a brewery application
Year of Mfg: 2009

P-3400 HHS

Sharples Division of Alfa Laval

1

Sharples high speed P-3400 HHS in 316 stainless with P-95 gearbox and 3" pitch conveyor, capable of up to 5000 RPM speed generating up to 4970 x G. With moon plate dams and 360 degree cake discharge.

P-5400

Sharples Division of Alfa Laval

1

Truck mounted Sharples P-5400 in 316 / 317 stainless with 8.5" pitch single lead conveyor with STC tiles, P-47.5/180 gearbox, 250 HP main drive NEMA 7, VFD, with backdrive 50 HP or torque arm system, all truck mounted, with enclosed 20 x 8 room for controls and drives, with auger conveyor cake takeaway system.

P-5400SB

Sharples Division of Alfa Laval

8

Sharples Screen Bowl P-5400 decanters in stainless with 25 x 90'' bowl dimensions. More details to follow.

XM-905

Sharples Division of Alfa Laval

2

Used Sharples XM-905 decanters thickening design (PM-95000BD) with 15 degree contour beach angle. 16" double lead conveyor, axial flow with STC tile assemblies and BD disc, P-95-180 gearboxes, ring dam centrate discharge, 400 HP Reliance drive motor, 460/3/60 motor 452 Amp, Frame 5010Z, S.F. 1.15; 40 HP DC backdrive, 360 degree cake discharge with STC lined ports, grooved bearch, silencer rings, similar to PM-95000. VFD control systems added late 1990s. Used 100-200 hours since last reconditioning. Built 1987 and 1988. Used previously to thicken 1-1.5% W.A.S. to about 8% prior to anaerobic digestion. Bowl dimensions 40" x 140". New price each about $1,000,000. Attractive reconditioned price from Kyte Centrifuge.

Flottweg Z4D-4/454

Flottweg of Germany

1

420 mm diameter bowl.
3500 rpm maximum bowl speed.
Fitted with hydraulic back drive for differential speed control.


This unit is currently missing the small end hub and the gearbox adaptor flange

P-3000

Sharples Division of Alfa Laval

1

Sharples P-3000 in stainless with hogged out lined cake ports. No motor. Gearbox included, ratio unknown. Pitch unknown. Frame included.

P-5400 CONVEYOR

Sharples Division of Alfa Laval

1

P-5400 conveyor in 316 ss with 5" single lead conveyor with STC tiles, 2 bolt 2.5" diameter feed nozzles with STC liners. Priced as-is ........$17,500 fob Amarillo, TX.

P-3400

Sharples Division of Alfa Laval

1

Rental P-3400. Set up with variable speed backdrive (or torque assembly), 4.25" pitch conveyor with STC tile assemblies full length of conveyor, 316 ss, table mounted. With control panel, 50 HP drive VFD, 20 HP VFD backdrive. Table mounted.

P-5000

Sharples Division of Alfa Laval

1

Decanter, Sharples model P-5000 Super-D-Canters in 316 / 317 stainless. Details on request.

PM-35000

Sharples Division of Alfa Laval

3

Sharples PM-35000 decanters, details to follow.

P-3400

Sharples Division of Alfa Laval

1

Reconditioned P-3400 decanter with 3" pitch single lead conveyor with stellite hardsurfacing, ribbed bowl liner, hogged out cake ports with carbide liners, feed ports with carbide liners, 125 / 1 gearbox, all 316 stainless, 40 HP main drive, 460/3/60, torque arm assembly.

Aldec G2-40

Alfa Laval of Sweden

1

•Maximum Gravity: 1.2 (Kg/dm3).
•Revs/min: 1475 rpm.
•Voltage: 400 volts.
•Power: 35kw.
•Year: 2005.
•Additional Information: Rotor speed: 4000 rpm & Interior Rotor diameter: 353/202mm.

NX-314

Alfa Laval of Sweden

1

HS-204L-S

IHI of Japan

2

IHI of Japan model HS-204L-S in stainless with bowl ~ 8" x 24", good for 3500 x G, 5 HP motor, details to follow.

HS-404FS

IHI of Japan

1

IHI of Japan model HS-404FS in stainless, vaportite, with 30 HP motor, table mounted, details to follow.

D-5LL

Andritz

1

Andritz model D-5LL-C30CHP in stainless with bowl dimensions of 20.5 x 102'. Brochure max speed 3200 RPM generating 2976 x G. Nametag lists max speed of 3000 RPM generating 2620 x G. Stainless construction. 100 HP main drive with backdrive. Carbide tiles on conveyor, cyclo gearbox with differential range of 1-20 RPM.

Giant 2

Pieralisi of Italy

1

Pieralisi Giant 2 decanter in stainless truck mounted, details to follow.

S1-1

Humboldt

1

Humboldt S1-1 decanter in stainless with 30 HP main drive and 10 HP viscotherm backdrive, built 1995, less than 500 hours operation since last reconditioning. Bowl 13.8 x 34.7'' and maximum speed 3100 RPM.

S4-1

Humboldt

1

Humboldt model S4-1 with bowl dimensions of 35.4" x 98" in stainless. Previous service food plant waste system. Details to follow.

40X60 SB

Bird

2

Bird Humboldt 40 x 60 screen bowl decanters in stainless, excellent condition. Missing bases. With casings and pillowblock housings and geaboxes. Max speed 1800 RPM generating 1840 x G. Built 1969.

HB 3700

Bird

1

125 g.p.m. capacity, 75 Hp main drive motor, oil lubricated bearings with oil pumps and cooling heat exchanger, control panels included. It has been converted to run electric back drive with variable frequency drive units also included.

SA-56

Bird

5

Bird SA-56 gearboxes, ratios 61/1 and 39/1. Priced as-is at $7500.

5900

Bird

40

Bird Screen Bowl Centrifuges
Size 36” x 96”, Bowl Contour Cylinder,20°, Cylinder, Gear Unit SA-35
Motor: Reliance Electric, Frame 4491, Type P, 200 HP, 460 Volts, 1190 RPM, 60 Hz, 3 Phase.

CA-365-010

Westfalia of Germany

2

Westfalia model CA-365-010 decanter in stainless with paring device pump discharge of centrate, 50 HP motor, built 1983 / 1984. Previous use citrus pulp.

CA-365-01

Westfalia of Germany

1

Decanter, model CA-365-01 rebuilt by Westfalia and used 30 hours on brewery stillage. Excellent, priced @ $63,800 net skidded or crated for shipment. With motor.

CA-450

Westfalia of Germany

5

Westfalia decanter CA-450 in stainless. Details to follow. Built 1992, 1993, (2) 1997, 1999.

CA-450-00-30

Westfalia of Germany

1

Westfalia model CA-450-00-30 clarifier in stainless with 40 HP drive motor. Reported with 300 hours operation after reconditioning.

CA-505

Westfalia of Germany

1

Built 1992
Bowl Size 20 x 80

CA-635

Westfalia of Germany

1

Westfalia model CA-635 decanter in stainless. Details to follow.

P-12

CARR

1

CARR Powerfuge model P-12 in 316L, 17-4ph stainless steel, capable of operating at 10,840 RPM, 4-40 degrees C, built 1996, 2400 pounds.

P-12

CARR

1

Carr model P-12 Powerfuge, with solid bowl basket and bottom discharge of cake solids via plow, rated at up to 20,000 x G. Feed rate up to 500 liters per hour (2.2 GPM). Bowl volume 9 liters (8 liters cake volume). Cake S.G. 1.5 maximum. With 10 HP 480/3/60 motor, rated at 15 psi 4-40 degrees C. Bowl titanium with other parts 316L and other stainless, with small agitated centrate tank, all skid mounted.

RSA-80-01-076

Westfalia of Germany

1

Westfalia RSA-80-01-076 disc desludgers, details to follow. 4500 RPM, built 1987.

SB-80-47-076

Westfalia of Germany

1

Westfalia Model SB-80-47-076 self thinking desludger in stainless construction. 40 HP, skid mounted. Details on request.

CNE 300 Bactofuge

Westfalia of Germany

1

Model: CNE 300-01-076 Bactofuge
Capacity: 30.000 Litres/Hour
Year: 1997
Base plate and tools
Control panel
Manual Included
Full service history
Serial number: 1717 545

CSA-160-47-076

Westfalia of Germany

1

Westfalia CSA 160-47-076 disc bowl polishing clarifier, new in 1989, bowl speed 6800 rpm,

hermetic design, incl. control panel, tools and operation manual.

SA-60-06-177

Westfalia of Germany

1

Westfalia clarifier model SA-60-06-177 reconditioned in 2005 with new wye/delta controls, motor 40 HP, 230/3/60, with water harness, flow valve, base, belt driven, excellent condition. Available due to process requirement changes. Owner states it is in running condition (although we recommend a professional shop check it over prior to operation). Location mid Eastern Seaboard. Prior use, hot restaurant grease and chicken fat after a decanter.

SA-82

Westfalia of Germany

1

1973 Good condition

SA-20

Westfalia of Germany

1

On skid; very good condition

MSA 90-01-76

Westfalia of Germany

1

•Bowl Speed (rpm): 5920 rpm.
•Throughput (l/hr): 10,000 LPH.
•Voltage (volts): 415 volts.
•Frequency (hz): 50Hz.
•Power (kw): 18.5kw.
•Other: Comes with base plate, tools, control panel & operation manual.
•Permissable Density of Product: 1.1kg/dm3

SAMN-15007

Westfalia of Germany

5

Westfalia model SAMN-15007 (new code SA-40-03) with light phase discharge by gravity, heavy phase discharge by paring device.

SA-160-33-177

Westfalia of Germany

1

Westfalia model SA-160-33-177 three phase desludger with self thinking solids discharge, gravity discharge of light phase and paring device pressure discharge of heavy phase.

SA-80

Westfalia of Germany

2

1974 and 1975 units

MTA-59-03-024

Westfalia of Germany

1

Unused except for test run

D-18

Baker Perkins

5

Podbielniak D-18 extractors in 316 SS, complete with variable drive and all accessories. Still installed. Previous use antibiotic. Excellent. 460/3/60. Priced at $150,000 each FOB location. New cost reported to be $350,000 each.

B-10P

Baker Perkins

1

Baker Perkins Podbielniak liquid - liquid extractor model B-10P in stainless steel. With cover. Fob location USA.

H-900 Conturbex

TEMA

1

One (1) H-900 unused built 1999, test run only, 316 L construction, 75 HP, New price 1999 $400,000.

AX-213-31B-60

Alfa Laval of Sweden

1

High G-force Alfa Laval AX-213-31B-60 desludger disc centrifuge. Details to follow.

UVPX-207-24A

Alfa Laval of Sweden

2

Alfa Laval model UVPX-207-24A disc desludger three phase design. Two complete plus parts of others.

CRPX 207-34-A

Alfa Laval of Sweden

4

S/N 2903313

AX-215-31B-50

Alfa Laval of Sweden

1

Alfa Laval High G-force desludger model AX-15-31B-50. Maximum G-force 14,000 x G at periphery. With 37 KW motor, 400-3-50.

MAPX-313

Alfa Laval of Sweden

1

Alfa Laval MAPX-313 completely reconditioned and unused after, with control panel and XP main drive motor. 460/3/60. Located USA.

BRPX 417 SCU-31C-50

Alfa Laval of Sweden

2

Both units have approx 30 hours runtime after being fully reconditioned by a reputable centrifuge engineering company.
Included with units is a PLC control system running both centrifuges mounted in stainless steel control box.
The PLC is an Allen Bradley SLC 5/03 CPU connected to a Panel View 600 screen.
The unit has 1 Analog Input card SLC 50 Cat. No 1746 NI8 C, 2 Input cards DC Sink SLC 500 Cat No. 1746-IB16 C,
3 output cards SLC 500 Cat No. 1746 OW16 C.
PLC is mounted in existing water proof cabine

CHPX 510

Alfa Laval of Sweden

1

Year 1988
Previous duty: separation of particles from liquid

BRPX-417-SFV-31-CGL-60

Alfa Laval of Sweden

1

Alfa Laval juice clarifier model BRPX-417-SFV-31- CGL-60. 3950 RPM. No tools, no control. Belt drive.

BRPX 417 SFV-31CGL

Alfa Laval of Sweden

1

Used in wine making; comes with all parts needed

Alfa Laval BRPX 617 SFV-31CGL-50

Alfa Laval of Sweden

1

Used for wine making; Includes all parts needed for use

HZ-160

Krauss Maffei

1

Krauss Maffei HZ-160 peeler with carbon steel bowls and casing rubber covered on contact parts, painted exterior. Hydraulic drive system.

SZ-90L

Krauss Maffei

1

Krauss Maffei pusher single stage model SZ-90L in 316 ss. Details available.

S-19.5

Baker Perkins

2

Baker Perkins model S-19.5 single stage pusher centrifuges in 304 stainless construction. Built 1965 and 1950, with motors, complete with feed tubes and rinse features.

M-700/2

Escher Wyss

1

Bird Escher Wyss pusher model M-700/2 in stainless with 50 HP and 20 HP motors, 440/3/60. Never used, built 1971. Bowl 27" in diameter.

Pressure Filter

Rosemund

1

Rosemund paddle filter 86 square foot (8 square meter) pressure filter with 316L ss contact parts and 304 ss jacket. Vessel rated at 50 psig FV (3.3 bar and full vacuum) and 300 degree F, jacket and base rated at 90 psig (6 bar) and 300 degrees F (149 degrees C.) Built 1989. 40 HP (30 KW) hydraulic motor Class 1, Div. 1, Gp C. & D., plus 5 HP hydraulic pack motor. All motors 460/3/60. Weight of vessel 74,000 pounds (33,600 KG).

SA 12-00-006

Westfalia of Germany

1

Manufactured in 1993

Flottweg Z42-3/441

Flottweg of Germany

1

factory rebuilt, without controls

SA 20-06-076

Westfalia of Germany

1

1 Westfalia SA 20-06-076 clarifier

OSA 35

Westfalia of Germany

2

2 Westfalia OSA 35-02-066 oil purifiers

Very reasonably priced.

SA 35-06-076

Westfalia of Germany

1

1 excellent SA 35-06-076 clarifier

Can be quoted as is or reconditioned

SC 35-06-177

Westfalia of Germany

1

This machine is a model SC35-06-177.
We offer the machine complete, professionally refurbished
Including
Controls for motor starting and valve control for automatic desludging
Set of tools
Flow meter
Foundation plate
18.5kW drive motor
Delivery time would be 2-3 months.

PM 75000 base and case

Sharples Division of Alfa Laval

1

1 stainless cover
1 base and lower casing

In USA
Can be offered separately

P 5400 Conveyor

Sharples Division of Alfa Laval

1

5" pitch

CB-505-71-32

Westfalia of Germany

1

Westfalia decanter model CB-505-71-32 with two vane paring device for centrate removal, welded hardsurfacing on conveyor, built 2001, no controls, motors probably need replacement for VFD. More info to follow with pictures.

BRPX 213

Alfa Laval of Sweden

1

1 Alfa Laval BRPX 213HGV-35-22 clarifier

low price

SB 80

Westfalia of Germany

1

1 Westfalia SB 80-06-177 clarifier

available as is or reconditioned